Product
MODULAR ONU





Features：

Miniaturized, low-cost, flexible deployment, suitable for deployment in ONU access density is not high, small and medium sized networks;

Layer aggregation switching, support port VLAN, flexible QinQ, link aggregation for network operators to offer a variety of flexible options;

QOS support, hardware-based implementations DBA dynamic bandwidth allocation in the downstream direction can configure multiple priority scheduling queue, a fundamental guarantee for the high-priority services can be best guaranteed QOS.

Rich OAM functions, the system supports ONU auto-discovery, auto registration, support for single link automatic loopback testing capabilities to support port-based, protocol-based VLAN support IGMP Proxy, Snooping function, ACL packet filtering based on port, packet classification, port-based traffic control, traffic shaping and other rich operable and management features.

. Complete network management functions support centralized management of my company s integrated network management platform EMS software supports native command line management, SNMP management, support the band, band network management;

EMS network C / S architecture-based design, with a complete network management capabilities. Supports automatic network topology, manually topological modification, support for OLT, ONU software online upgrade;

Easy to install, easy to maintain, plug and play device is turned on to work properly, ONU automatically registered, no additional configuration; the device after the device deployed operational status monitoring and configuration operations necessary business through a remote management platform.


Technical Parameters：

project

Performance parameters

Uplink port

Physical interface:
4-8 100 / 1000M adaptive electrical port, RJ45;
4-8 gigabit SFP interfaces, 1000BASE-LX;

PON interface

Quantity: 4-8
Physical interfaces: SFP slots
Interface Type: 1000BASE-PX20
The maximum splitting ratio: one sixty-four

Management port

A 10BASE-T Ethernet port band
A local management interface CONSOLE

PON optical interface specification 
(applicable to the company s PON module)

Transmission distance: 20KM
Port rate: 1.25Gbps symmetry
Wavelength: Send 1490nm, 1310nm reception
Launched optic power: + 2 ~ + 7dBm
Receiving sensitivity: -27dBm
Saturated optical power: -6dBm

NMS way

Support SNMP, TELNET, local network management; integrated network management platform to support the company EMS centralized network management;

Network capacity

Fan testing;
Port status monitoring, configuration management;
Layer switching configuration management section, such as VLAN, TRUNK, RSTP, IGMP, QOS and other configuration management EPON some functions, such as: DBA bandwidth allocation, ONU authentication, ACL configuration, QOS, etc.
Access ONU configuration and management (see ONU specifications)
User Management
Alarm Management

Floor of the exchange part

Support port VLAN, protocol VLAN; support VLAN TAG / UNTAG, VLAN transparent transmission, VLAN conversion; supports 4096 VLAN;
Support 802.3ad link aggregation (TRUNK)
Supports RSTP Rapid Spanning Tree
Port-based, VID, TOS, MAC address QOS
Support IGMP Snooping
Support 802.1x flow control
Support port performance statistics

EPON section

Accord IEEE802.3ah EPON protocol
Supports downstream data encryption
Support DBA bandwidth allocation
It supports standard OAM and extended OAM
Support ONU Certification
Dynamic Ranging Support
Support ACL packet filtering
Support QOS, traffic classification and marking
Support RSTP, IGMP
Proxy

Ordering Guide：

GSD-100

0S

Gaoshida Cassette OLT Model

4: 4 PON ports
8: 8 PON port

Failure Analysis： 
1 Power Check the following items to help separate issues:
Check the ambient conditions, you can not let EPON access equipment from overheating. Confirm EPON access equipment into and out of the pores clean. Recall "General site requirements." EPON access equipment requires temperatures workplace is -40 ° -85 °
As EPON access equipment can not start, and the "PWR" light is off, check the power supply.
2 ports, cables, and connection failure
If the port can not LINK EPON access equipment on, check the connection cables are correct, the peer connection is normal;
As the system starts, but Console port does not work, make sure the Console port is configured as 9600 baud, 8 data bits, no parity check bits, 1 stop bit, no flow control.